Description

Self Cured Temporary Crown and Bridge

LUSTRA C & B is a temporary crown used during the fabrication period of a permanent crown, offering high dental aesthetics. It does not break in thin sections, dramatically reducing repair cases. Shades: A1, A2, A3.

Characteristics

1. LUSTRA C & B

• Does not break in thin sections.
• No smell.
• Rapid polymerization guarantees short working time in the oral cavity.
• With mixing tip, it dispenses smoothly.
• 50 ml 1:1 cartridge type is compatible with an impression gun.
• Can be used with a light-body mixing tip.
• Does not break in thin sections.
• No smell.
• Low stickiness.
• Reduced working time due to light-cure.
• Easy to repair.

Application Range

• Temporary single crowns and temporary bridges.

Application Method

1. LUSTRA C & B

• Take an impression of the tooth.
• Preparation.
• Choose the LUSTRA C & B shade closest to the tooth.
• Apply separator on the prepared tooth.
• Put LUSTRA C & B  into the mold impression and place it on the tooth.
• After 3 minutes, remove from the mouth.
• After complete polymerization (6-7 min later), apply temporary cement and place.

2. LUSTRA C & B  Putty

• Tooth Preparation.
• Choose the LUSTRA C & B  shade closest to the tooth.
• Apply separator on the prepared tooth.
• Open the cap and dispense the material.
• Apply to the prepared tooth and shape it.
• Light-cure the entire surface for 10-20 sec.
• Remove the temporary crown.
• After sufficient light-curing, apply temporary cement and place on the tooth.

Precautions

1. LUSTRA C and B  is only used for oral tissue.
2. Avoid contact with eyes.
3. In case of contact with the skin or eyes, clean with pure water several times, and then consult with a medical specialist if necessary.
4. Do not use expired LUSTRA  C and B.
5. For dental use only.

Storage

1. Do not store it under conditions of high temperature or intense light.
2. Close the cap immediately after use.
3. Store in a dry and cool place.
4. Valid for 2 years from the manufacturing date.