Description

Non-Eugenol Temporary Cement

Tempra is a non-eugenol temporary cement used to make temporary crowns or prosthetic appliances adhere. Tempra can be used for patients showing allergic reaction to eugenol and does not interfere with the curing of auto-polymerizing restorations.

Characteristics of Tempra

• Easy to remove residual cement from the inner surface of a prosthetic appliance or tooth surface.
• Appropriate adhesive strength.
• Fast curing in the oral cavity reduces operation time.
• With attachment of an eco-tip, a minimal amount of Tempra is used.

Applicable Range

• Temporary adhesion of temporary crowns .

How to Apply

1. Preparation before use

• Check the expiry date and package of the product before use.
• Squeeze catalyst and base of Tempra to meet a 1:1 ratio.
• Attach an eco-tip or mixing-tip.

2. How to use

• Tempra : after checking the necessary amount, squeeze Tempra onto a mixing pad and mix for 10-15 sec.
• Insert the mixture into the temporary crown or prosthetic appliance.
• Remove residual cement using an instrument.

Operation / Curing Time

Mixing time: 10-15 sec.   Operation time (23°C): < 30 sec.   Curing time in oral cavity (32°C): < 3 min 30 sec.

Precautions

1. Operation time is accelerated or delayed by about 5 seconds depending on 1°C rising/falling.
2. This product is not removed easily when it stains clothes; pay attention to avoiding staining.
3. When skin or eyes come in contact with this product, rinse with clean water several times and seek medical advice if needed.
4. Do not use a product past its expiry date.
5. Do not use or handle this product other than as a dental practitioner.

Storage

1. Avoid hot temperature and strong sunlight.
2. Close the cover immediately after use and store it.
3. Store this product in a dry and cool place.
4. This product is valid for 2 years after its manufacturing date.